I was trying to play an avi through the usb with a thumb drive, the avi played back fine except ,no sound. The audio was coded in mpeg aac. Is that difficult to implement in the code?Thanks for a great receiver!
I was trying to play an avi through the usb with a thumb drive, the avi played back fine except ,no sound. The audio was coded in mpeg aac. Is that difficult to implement in the code?Thanks for a great receiver!
I have already told Ma Wang about the need to fix mpeg aac and they are working on it
Would it be possible to have separate categories for scanning to make it possible for FTA only or All. Radio separate from TV. Seems like not enough choices among the headings of scanning and too much is under one.
Frequency limits for scanning like start 11700 to stop 12200 mhz for example.
1. Could there be a firmware version with east facing satellites. I like the receiver but all of the satellites are West facing and of no use to me in my part of the world.
2. Furthermore, the strength meter for the signal is always at 75-79 regardless of where I face the dish even when its directly facing the wall. This makes it hard to determine left-right azimuth and ultimately makes picking even the most basic satellite doubly difficult.
Thanks
Thank you for your inputs. We will take a note and make sure XSAT/ X2 received your request,Quote:
Originally Posted by jaymwine [Only registered and activated users can see links. Click Here To Register...]
Hey Vip3r
Here is a request I got from someone for the X2. Can you forward this to Xsat/X2 to see if it can be implemented in the next releases??
regards,
Carlos
"""Carlos, on the X2, after hitting OK, in the channel list, pressing either the FAV or the SAT button does the same thing, that is, they just go to another sat, there is no list, so I have no way of knowing what sat is going to come next when I hit the Button.
But, I just noticed, on the Geosat HDVR1200, pressing 'SAT' button in channel list will bring up a list of Sats to choose from, FAV button does nothing.(I have not set any favorites)
1. load euro firmware insteadQuote:
Originally Posted by jaymwine [Only registered and activated users can see links. Click Here To Register...]
2. signal strength only measures the connection from receiver to lnb.You could be aimed at the ground and still get signal strength.It's the signal quality you want to adjust for.
works great. thx
Would be good when do autoscan save the settings for next scan. for example if you only scan tv channels put it next time that do another scan.
i purchased one and tried the latest firmware which did not work out so well. the box kept rebooting or the lnbs lost power.
i installed the july file and at least it more or less stopped losing the lnbs.
my last concern is that i cannot find a good way to enter my fss lnb settings for a blind scan. is ku bandstacked there?
i didnt not see it
thanks
I haven't seen a ku bandstacked setting but you may try the user lnb option and there is an option there for dual user lnb, try to enter your two different lnb settings into that and see if it works. I had some double scanning problems with my cband bandstacked setup so I would have to edit the channel lists afterwards.