hi
HELP
My receiver hang up same as receiver Mr. Bill Pihl's.
I can not connected with RS-232.
Do can anyone recovery with RS-232??????
tanx
Printable View
hi
HELP
My receiver hang up same as receiver Mr. Bill Pihl's.
I can not connected with RS-232.
Do can anyone recovery with RS-232??????
tanx
what are the symptoms?? any light on??
yesQuote:
Originally Posted by carlospr43 [Only registered and activated users can see links. Click Here To Register...]
only show light on -->> on the LED panel.
and
after the power on --->> only show 3 second X2 background on the TV and after that only show black on the TV.
please help me.
tanx
Have you try using the analog connectors Yellow/ White and Red to see if there is video there?? maybe the HDMI was dissabled???
HiQuote:
Originally Posted by carlospr43 [Only registered and activated users can see links. Click Here To Register...]
I connected with AV cable ; but same as old.
Please answer to my question ===>>
Do can anyone connected with RS-232 to box ?
Do can anyone recovery with RS-232 ?
tanx
Yes many have recovered with RS-232 to box. here is the software
[Only registered and activated users can see links. Click Here To Register...]
:tiphat2: here is a recover program.[Only registered and activated users can see links. Click Here To Register...]
I have recovery file;Quote:
Originally Posted by Gary Bidwell [Only registered and activated users can see links. Click Here To Register...]
But ;
Do can you connected with RS-232 to box ?
Do can you recovery with RS-232 ?
tanx
Yes , you can connect using a Null Cable and your computer using your Com Port using RS232. Yes, you can recover your box using this procedure. Make sure the file you try to load for the recovery is : 326sz_v33_1024.r1689.flash.gz.gro.stp. It wont accept regular *.ssu files
Unplug your box from power source
1- Open loader
2- Open File
3- look for the file
4- Hit START
Plug the power back
Wait until finish, box will re-boot by itself
That is not the same problem that i had, I might be wrong but that almost sounds like you are not getting any feed from your LNB or a software glitch, The guys here really know what they are talking about so follow their advice and you will be up and running in no time.