What enigma2 image did you load and where did you get it from?
Boot to Spark,FTP into the box using Filezilla or similar, and find the net_server.xml file.
Printable View
What enigma2 image did you load and where did you get it from?
Boot to Spark,FTP into the box using Filezilla or similar, and find the net_server.xml file.
Not sure on the E2 file. I had 2 that has been on my computer for awhile and I honestly don't remember which one is loaded and where I got it. If you have a better file let me know and I'll load it ASAP. I haven't been able to get any response from the box with Filezilla using 192.168.40.19 Am I using the correct IP ? I can load files via TFTP and the Cisco program with that IP
Try these three. One of them should work.
192.168.0.69 - 192.168.3.119 - 192.168.3.1
Quote:
Starting kernel console=ttyAS1,115200 rw ramdisk_size=6144 root=/dev/ram0 init=/
linuxrc ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255. 0.0:Spark:eth0:off stm
maceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=7000 nwhwconf=device:eth0,hw
addr:30:00:0A:00:11:6B Manufacture=Spark-Project STB_ID=0C:00:0A:00:00:11:6B - 0
x0153d000 - 2896628 ...
Correct enigma2 image is in the link.
[Only registered and activated users can see links. Click Here To Register...]
Looks like the e2 side is complaining about the wrong software being installed.
Downloading now. ( back at shop) I will run this in just a moment and see what happens
20171130 loading
No joy with FTP and so far the same with E2 Now showing 00:00 and counting up
You will need to connect the box to a router or similar device and get the Alien2 ip for ftp from the router. That is the only other way I know if the listed ip address will not connect.
OK I'll give that a shot..thanks
My router here in the shop doesn't show the A2 connecting but both LED's are lighted on the LAN module. I dunno looks like I am going to be in the market fr a new receiver