OK.
Do you have FileZilla?
Printable View
OK.
Do you have FileZilla?
Just download the new version of FileZilla 3.6.0.2
OK.
We need to wait and see what Viper wants to do. You cannot do anything else without FileZilla and connecting the receiver to a network. Then you will need to get the box ip without going into the receiver's menus.
The receiver is not dead but it is useless to you in its present condition. EB
thank you EB
OK.Quote:
Originally Posted by jdelanos40 [Only registered and activated users can see links. Click Here To Register...]
You will need to connect the XXX to a network router, go into the router and get the ip of the XXX. Then see if you can get FileZilla to connect to the XXX.
Not sure how to connect XXX to network router. I have the XXX ethernet cable connected to a wireless bridge (Linksys by Cisco). And from my TWC modem I have a Netgear N750 Wireless Dual Band Router. On FileZilla what do I type in on Host, Username, Password and Port.
JD, Please check you PM box and reply through PM.
Thanks
You will have to connect the XXX directly to the router(RJ45 to RJ45) then go into the router and find the ip of the XXX. This is the hard way. The easy way would be through the XXX menu but you have no access to it.Quote:
Originally Posted by jdelanos40 [Only registered and activated users can see links. Click Here To Register...]
The IP of the receiver may also be seen through Telnet or putty. You would have to connect the RS232 port to your computer for this method to work.
Thanks for all your help, but it seems too complicated for me. I've decided to ship to ViP3R's technician for a fix.
Your XXX is repaired and on it's way back..you should see it very early next week.Quote:
Originally Posted by jdelanos73 [Only registered and activated users can see links. Click Here To Register...]