Ya the 1562 tranponders will all come in if entered manually on most all receivers. It just takes several seconds to lock.Quote:
Originally Posted by el bandido [Only registered and activated users can see links. Click Here To Register...]
Printable View
Ya the 1562 tranponders will all come in if entered manually on most all receivers. It just takes several seconds to lock.Quote:
Originally Posted by el bandido [Only registered and activated users can see links. Click Here To Register...]
Well, got the Anaconda on Thursday and I've been as busy as Colombian Hooker with the US Secret Service ever since. Finally got it out of the box and it is up and running. Got it booted in NTSC and, I must say right off, the picture is amazing. I was wondering if there is a way to delete specific channels? I have looked and it is probably right in front of me but I have missed it if it is there.
Have a look in the channel manager part of the system tools section of the main menu.
The Channel Manager is very powerful once you learn and understand all of its features. I discussed this a little bit in the Raptor review thread. EB
Got it, thanks. Now that is one nice system to delete channels. No more one at a time and taking forever.
Can some one point me were to add TP's?
In the dish install menu scroll down 1 to tp and press green button to add or yellow to edit.
I knew all was going too well. Everything was working fine until I got to 91W. When I tried to blind scan I got a message that said scanning single horizontal LNB and then a message that said L-Band of Universal LNB with Vertical Polarity. I have blind scan set for manual, 3700 to 4200, All Polarity, All Channels and 5150 Tried a few other sats and same thing. Auto scan works fine but obviously doesn't find new tp's. Any suggestions?
It scanned in fine for me.
Just keep scanning EC, that is a message I've seen before when I was scanning on c band. Another thing I've noticed, as with all stb, they need to a reboot every so often including the anaconda.