I second the RC control problem being unresponsive at times. Hopefully it may be just an easy firmware tweak.
Printable View
I second the RC control problem being unresponsive at times. Hopefully it may be just an easy firmware tweak.
The satellites transmit noise. Our lnbs and fta receivers turn the noise into radio and tv pictures.Quote:
Originally Posted by Costactc [Only registered and activated users can see links. Click Here To Register...]
A blind scan has to listen to all of the noise and try to determine what transponders are in it, and then get information including channels from the transponders that are found. Usually, scans or blindscans will take longer when there are many satellites located close together. A look at Lyngsat will show that there are many satellites operating at or within 3 degrees of 111.1W, and only a few satellites are operating at or around 78West. This can be one explanation as to why the scans times are vastly different at these two orbit locations. There is probably much less noise for the receiver to deal with at 78West than at 111.1West.
I sent them a message about the remote delay..I'm not experiencing this myself but if you guy's are it should be looked into.Quote:
Originally Posted by eastof111 [Only registered and activated users can see links. Click Here To Register...]
They will be releasing new software for the WiFi drop out in the next week or so..on the remote they said the engineers checked the remote response and could not see anything wrong there and suggested brand new battery's..what can I say that's what they told me..lol. Like I said I'm not experiencing this so if someone could post a short video in a separate thread I can send them the link to look at.Quote:
Originally Posted by ViP3R [Only registered and activated users can see links. Click Here To Register...]
Batteries were the only thing the x2 III didn't come equipped with and the ones in my remote are brand new. Last night I attempted to power it up but the remote was totally unresponsive, I had to do a hard boot to get it on.
I have the same problem with the number one button.... no response. Also, tried new Duracells, Maxells and zilch, nada. Tried the smaller RC and it works great, but unfortunately it does not have all the buttons.