Nice!
Also. I must say you always have the latest in fashion. Please upload or post your CinoGriPLi skin! Thanks.
Printable View
Nice!
Also. I must say you always have the latest in fashion. Please upload or post your CinoGriPLi skin! Thanks.
This would be a game changer to assist in dish orientation. I want this. If familiar with the satellite arc, I bet you could almost immediately get some kind of weak signal from a satellite even if elevation is not precisely aligned yet.Quote:
Originally Posted by stephan94 [Only registered and activated users can see links. Click Here To Register...]
For some reason the timer worked fine for a couple of days but the last 2 recordings were only 10 minutes out of 30 programmed.
timers.xml:
<?xml version="1.0" ?>
<timers>
<timer begin="1703979000" end="1703980740" serviceref="1:0:1:3:1:FF37:A2F1017:0:0:0:" repeated="127" name="ABC" description="ABC" afterevent="standby" eit="0" location="/media/usb/movie/" justplay="0" always_zap="1" pipzap="0" zap_wakeup="always" rename_repeat="1" conflict_detection="1" descramble="1" record_ecm="0">
</timer>
</timers>
Today I was able to relocate my dish and my system is available again. I could test something with my Mio+ if required.
Also, it's been raised that TNAP5 Positioner Setup no longer displays tenths of a dB as previous images did. This makes it more difficult to manually position the dish precisely since you don't see the reading change until you gain or lose an entire 1 dB. Yet when you exit Positioner Setup, you can see the SNR reading with the tenths digit. Was this change intentional? Can it be changed back?
[Only registered and activated users can see links. Click Here To Register...]
Actually you are programming 29 minutes according to your timer information.Quote:
Originally Posted by eelstrebor [Only registered and activated users can see links. Click Here To Register...]
10 Minutes --Where? 10 minutes at the beginning, 10 minutes in the middle, 10 minutes at the end....etc.??
I ran this same recording for some days and did not have any problems. I doubt you find the TNAP 5 file structure to be at fault because no one else has mentioned a similar problem here or at the PLi forum which TNAP 5 is based on. Some detective type work will need to be done to sort of pinpoint where the problem is. The problem needs to be fixed, whether it is in your system or in the image itself.
[Only registered and activated users can see links. Click Here To Register...]Quote:
Originally Posted by el bandido [Only registered and activated users can see links. Click Here To Register...]
EB's screenprint is C-band, yours is KU. Maybe that's the difference in resolution?Quote:
Originally Posted by cyberham [Only registered and activated users can see links. Click Here To Register...]
C and Ku band will display the same signal on Positioner setup. Anyway, it will be fixed in the next online update.
Last question for this year: Will moded AVL6261 T2MI driver work on osmio mini4k too ?