Firmware 2.11.30

Just testing ultraplus 9200 firmware 2.11.30
about to go from 2.11.16 to 2.11.30 quite a jump, skipping 2.11.18 2.11.20 2.11.26

--> DLNA (DMS) Updated :
--> Supported file Format :
--> video: avi, divx, wmv, mp4(m4v), mkv, flv, mpg(mpeg), ts(m2ts), vob, mov, xvid
--> audio: mp3, m4a, wma, wav, ogg, flac, aac, ac3
--> image: jpg
--> Uncertificated file Format :
--> video : mts, m2t, 3gp, asf
--> audio : asf, fla, flc, m4p, pcm


----> Not Encrypt Record (available to PC play)
----> No Retention Limit
--> Unification of menu item name in different language : Changed :
----> Applications -> Plugin
--> Weather Forecast City list : Updated
--> Password visible to be hidden in facebook login : Adapted
--> Can not access to NAS equipment via DLNA : Solved
--> Dolby Digital + is not working in Timeshift : Solved
--> Recording file play failure in DLNA : Solved
--> Auto power off function : Newly Added
--> When move recording file with same event name to folder STB, it is overwritted : Solved
--> Auto Power option : Added
--> STB hangup with using EPG : Solved
--> Recording file can not playback on PC : Solved
--> Recording file is freezed when playback on PC : Sovled
--> Timer not working when FreeTV used : Solved
--> STB hangup from wake up : Solved
--> Boxer CI+ CAM shoule be working in non CI+ channel with normal SW : Solved (CI+ Boxer Viaccess DTT)
--> Can not search T2 HD channel and No signal : Solved
--> Deleting Tick mark when downloading plugin : Adapted
--> STB slow when choosing specific frequency : Solved

--> Kartina TV feedback : Updated :
----> Change OSD language to Russian for VOD Search
----> Speeding up channel switching
----> There is no mode (ECO - low bit-rate ), therefore possible freezes with slow connection speed.
----> There is no FF/ REW in VOD part
----> Archive with 3 days size is small, usually customers want watch programs within whole past week.
----> During long playback files from VOD possible picture freezes
----> There is no PIN protection for Adult channels.

--> RSS freezing : Solved
--> Descrable or popup message when changing the channel with recording a channel using CAM : Solved
--> Networking is blocked when connecting with router (DNS issue) : Solved
--> Hidden URL in Internet TV channel : Solved
--> STB hangup when watching internet TV : Solved
--> STB hangup when timeshifting works : Solved
--> Can not start scheduled recoridng in Tuner 2 : Solved
--> STB sudden hangup when wathching a channel : Solved
--> Duplicated terrestrial channel list : Solved

Looking forward to see the results.

[Only registered and activated users can see links. Click Here To Register...]

Thanks for posting this firmware apsattv. Very much appreciated!!!!!!

Kind Regards

Mark

I loaded in file with 97 channels internettv. Worked fine. Then copied another channel pack with channels on it to a usb then inserted it , added them when it asked.

result was, 17 channels total, hmmmmmm not 100+

I need to try it again, but as 1 single file with all of them in it.

I haven't loaded this one yet, but in the prior version I had to edit the feed file with 380+ channels. Then when loaded it pruned it down to 280+ channels. Hope yours works better.

Merged into 1 single large .feed file? well I will try that next. I did try that a very long time ago but. But all it did was cutoff the list at the 99 channel mark even though it accepted the larger file.

I did also try the following in terms of stream formats.
mms: FAIL
rtsp: FAIL
m3u8 FAIL

In my opinion they need to move away from the user interface with the horizontal internet tv channels along the bottom and move to a single bar vertical layout. To be consistant with how the regular channels listings are and to fit far more stream channels on the screen.

I doubt if it would make any difference but, you mentioned using the usb stick to load. I only ftp to load and over write the file.

Also, you can have an internettv.feed and url_list file in the same directory, but the list file will have precedence over the feed file. Sometimes, it will cause funny behavior.

I went back to the Openbox 2.11.26 version, because when I FTPed an internettv.feed file of 116 channels to the box, it cut it to 99 or 100. I also didn't like the bug mentioned in the Octagon forum where it will calibrate the time when you start it from deep standby and then promptly go back to deep standby! :wtf: And this is even when you have power saving turned off in the menu. Then there is that "Do you want to copy scaned channels to other tuner?" nonsense...