Well I found a new channel.
Bounce Tv scans in $ but is ITC.
105C 3922 V 30000
However the other chs in this mux lock up the Raptor. Takes a hard re-boot to get back on.
Printable View
Well I found a new channel.
Bounce Tv scans in $ but is ITC.
105C 3922 V 30000
However the other chs in this mux lock up the Raptor. Takes a hard re-boot to get back on.
There are a few others in that mux that have been open for awhile. Should work ok with openbox.
What size dish are you using and how long is the coax from the receiver to the dish? Also, there is another thread somewhere on this same problem.
It's NUVO that used to and still causes the lockups for me.
I'm using a 8ft dish, 200 ft of 1/2" CATV hard line.
For what it is worth, NuVo plays perfect for me using the Raptor and the Christmas HDMU Enigma2 image. I have not had lock-ups or any of the other bad habits the factory firmwares have.
EB,Quote:
Originally Posted by el bandido [Only registered and activated users can see links. Click Here To Register...]
Does your You Tube still work with the E2?
Would this address some of the problems I've had with the many sat positions I would like to use?
I do not know if E2 has support for YouTube. Maybe I can check on this later.
Enigma2 should work with your antenna system without any issues.
There are a couple of plug-ins in the webapps section that do YouTube for the HDMU releases. The first is called Webmedia and the second is called My TubePlayer. Both work well.