PDA

View Full Version : Optibox_AnacondaHD_2.11.49



Species
04-02-2013, 04:07 AM
- Upgrades & Imporvements :
--> Before Start update pls. stop PlugIns !

--> TvPortal+ function add. (only G Models)
--> Tivusat CAM matter improved
--> MP4 Audio improved (InternetTv+)
--> Dual CAM (Neotion) Recorded file freezing matter fixed
--> DiSEQc “No signal” matter improved
--> Hang up in SW download via FTP : Solved
--> ** SW should be upgraded after HbbTV function OFF
--> Hang up in TV Portal+ : Solved
--> Media Server (DLNA Server) Version : Upgraded
--> JPEG not supporting in DLNA : Solved
--> Booting Image missing problem fixed
--> HbbTV not working in France2 Ch : Solved
--> Hang up while HbbTV movie play : Solved
--> Add Quaranic Audio function in specific model : Solved
--> Duplicated or typo subtitle in Terrestrial : Solved
--> TV Portal Exit does not work : Solved
--> Subtitle missing : Solved
--> Can not open viaccess cable CH with specific CAM : Solved
--> RCU key not working on ZDF : Solved
--> Minor bugs fix.

mountaineer
04-04-2013, 12:39 PM
Seems USALS may be broke on this one. Either that or my anaconda is on the blink. Hooked dish to my prof and with smartdvb moved dish perfectly. Settings etc are right...used it before to move dish....now it just sits, tried multiple sats etc. Anyone else with that issue?

el bandido
04-04-2013, 01:12 PM
Carefully check your antenna settings to see if they changed.
Also,go back to the firmware you were using previously and see if the problem exists.

mountaineer
04-04-2013, 01:55 PM
It is in the software/firmware. Anaconda moves dish with ease to reference. If I select a sat after going to reference.....in the settings go to area then it will go there. Once there.... tuning another sat results in no movement. So dish goes to right place...will move to reference...will move east and west. in my mind it has to be software/firmware command issue...either not sending it or etc. I have 22K on for my KU maybe that is a problem. my cable goes straight from anaconda to motor then to switch. Seems to be problem with 22k on and usals. I turned 22 off and tuned knowing there would be no signal...then turned 22 back on and dish had moved. So it is in the 22/usals combo. Def. 22 problem...just turned it off then back on after 10 seconds and dish moved after not moving. I had it on G3c KU and then tuned 101. Dish did not move. Went to settings turned off 22 then immediately turned it back on...nothing. Then turned it off and left it for 15 seconds ..turned it back on and signal was there...hope this helps.
By the way like the firmware...any streaming in it? Thanks guys.

rrapush
05-16-2013, 12:09 PM
error 01 for my sat rec